NEC e313
- h
- harry thomas
- 16 Sep 2004
@ ACTIVMOBILE you can pick up an NEC e313 for £30 INCLUDING a £15 top up voucher. so dixons is NOT the best deal for an NEC e313 pre pay as we are.
- r
- rhave
- 15 Sep 2004
i am having problem with my nec e313 ,i can not access phone contact and message icon. pls help me out.
i am in nigeria.
thanks
- M
- MrsMango
- 15 Sep 2004
do not but this phone on 3. i was lied to by salesman as he told me the vouchers don't expre but afetr 30 days u lose everything.bben trying to get it unlocked for almost 3 months and nobody knows how to do it properley as 3 are not releasing the software contacted 3 several times by recorded delivery and they do not answer keep away from 3
- s
- sibel
- 15 Sep 2004
sorry ı must rewrite the message "usim card code haas been blocked" help mee!
- s
- sibel
- 15 Sep 2004
I tried the way you said. But When I pressed emergency and after C my phone turned off. When I first switched it onand pressed the down key again and again recieved a msg éUSIM card has been blocked" How can ı solve this problem???:(
- r
- rhave
- 15 Sep 2004
am currently using e313 nec phone but iam having problem with the phone contact and the message icon. pls i want u to help me out .
i look foward to here from u .
thanks
- k
- krazykat
- 14 Sep 2004
need to unlock the NEC e313 phone to work with t-mobile...can anybody help?
- z
- zoey
- 14 Sep 2004
my mum n dad brought me dis fone 4 ma bday its ded gud!!! da pics r ded gud they look just like a pic tuk off a propa digital camra
- G
- Grace
- 14 Sep 2004
Please, please, can anybody help me to unlock my NECe313?
I like the phone, but I don't like the network.
Many, many thanks
- A
- Amar
- 14 Sep 2004
to unlock ur phone u gota press *#4960#, then afta that switch off ur phone and change the sim and press on emergency and then press C and type 00000000 n press ok n ur done.
- s
- sibel
- 14 Sep 2004
I unlocked my phone with an unnecessary card. When ı tried to apply my own card a message "USIM sım card has been blocked" then phone turned off. ı couldn't change sim card how can ı do it?
- s
- sibel
- 14 Sep 2004
URGENT!!!With using an unnecessary sim ı unlocked my e313. BUt ı dont wanna use this sim card know it didnt accept my real card!how can I do it??? pls. help me:((( I wanna use my brillant phone.
- e
- ezhik
- 13 Sep 2004
found these usefull codes on Aussie3g,
when you go to SIM Lock mine says off now but network lock says on ? tried above tecnique with network code but it didnt work, you need a precise 8 dig code
in fact, above tactic will show on phone even if it is on home screen with 3 sim in it !
software version *#2820#
master reset *73738#
SP lock *#3210#
Cooprate lock *#8140#
SIM lock *#4960#
Net Lock *#7320#
in fact, when you input this, it just shows the status the phone is now.
I also find out if you want to unlock the Net Lock, you could input
#7320*(8 digits password)#
the thing is I don't know the password and I couldn't find it.
- e
- ezhik
- 13 Sep 2004
Hi,I did this
#4960*xxxxxxxx#
*4960*xxxxxxxx*xxxxxxxx#
method it said "sim lock off" but I can do nothing with it.When I hit any button It saying "to many aplications open".Looks like I to switch off natwork lock,but I dont know special code.If anyone know how to help me plz anser at ezhik@tut.by!!!!!!!!!!!!!!!!!!!!!!!!!!!!
- V
- Victor Nick
- 11 Sep 2004
It's outstanding..............................
- r
- robert dordunoo
- 11 Sep 2004
a have the NEC e313 and am in Ghana.i learnt i have to unlock the phone before i use and the serial number of my NEC e313 is 352801006232008. what do i do
- s
- safet sainoski
- 10 Sep 2004
why wont my fone give me real ring tones
and i have tried to recod it wont let me
- A
- Al
- 09 Sep 2004
NEC C313 / C316 / E313 / E606 / E613 / E616 / E808 Temporary Unlock Solution :
To unlock a 2G or 2.5G SIM card do the following :-
1) Put a 2G/2.5G Simcard into the phone and turn ON the phone.
2) Enter the following code into the phone (xxxxxxxx = any numbers, If the phone does not ask for a code after entering the #4960* part then this method will not work for you)
#4960*xxxxxxxx#
*4960*xxxxxxxx*xxxxxxxx#
3) Turn the phone OFF and ON again.
Remember the xxxxxxxx you used. You will need to use same code in the future.
You do not have to do this every time you switch the phone on.
Attention:
- This unlock method ONLY works with one Simcard. If you wish to change to another Simcard you will have to unlock again using this same code!
********************************************************
If you do this too many times (Appx 3) when you switch the phone on it states ‘PLEASE INSERT CORRECT USIM CARD’
What you need to do here is the 112 trick.
112 Trick :-
Switch on phone
Hit the Enrgy key
Dial 112 and hit send
Phone will say it needs to switch to 3g mode
Hit Ok
After phone had switched to 3g (hourglass stops turning) hit cancel to stop it phoning 112
Enter your 8 digit password (any 8 numbers seem to work here)
Phone will now go to your 2g/2.5g network
YOU MUST DO THIS EVERY TIME YOU SWITCH THE PHONE ON.
********************************************************
Below are a list of secret codes for the E313 / E316 / Various other NEC :
*#06# - Phones IMEI ***************
*#1110# - Subnet lock not used
*#2220# - Network lock 2 not used
*#4960# - USIM card lock Currently set to OFF
*#3210# - SP lock Currently set to ON
*#5830# - Unlocking codes (unlock what?)
4844 4464 - constant number (these are my numbers, yours may be different)
8444 4444 - changes after restart
4114 4495 - changes after restart
*#7320# - Network lock Currently set to ON
*#8140# - Corporate lock Currently set to OFF
##06# gets the response "switch to 3g mode"
##2820# gets the response "switch to 3g mode"
##3210# "SP lock The security lock was permanently turned off"
##4960# "USIM card lock The security lock was permanently turned off"
##5830# Unlocking codes
##7320# "network lock The security lock was permanently turned off"
##8140# "corporate lock The security lock was permanently turned off"
USIM card lock -
*#4960# (send) - Inquiry
*4960*code*code# (send) - Lock
#4960*code# (send) - Unlock
N.B. [code] is an 8 digits number
Network lock -
*#7320# (send) - Inquiry
*7320*code*code# (send) - Lock
#7320*code# (send) - Unlock
N.B. [code] is an 8 digits number
Network lock 2 not used -
*#2220# (send) - Inquiry
*2220*code*code# (send) - Lock
#2220*code# (send) - Unlock
N.B. [code] is an 8 digits number
Subnet Lock not used -
*#1110# (send) - Inquiry
*1110*code*code# (send) - Lock
#1110*code# (send) - Unlock
N.B. [code] is an 8 digits number
Reset to defaults -
This restores factory default options of your phone:
*73738# (send)
Software version -
shows phones software version:
*#2820#
********************************************************
Please note : Your credit / debit card statement will display the name
'Manufacturing99' for the unlock solution charge.
- D
- Daniel
- 08 Sep 2004
guy here from sydney australia Nec 313 is a cool phone had it for 3weeks now no probs with it yet didnt get a usb cable but got the software cd with it for free now i can transfer stuff from my phone to my pc really cool
- k
- kools
- 07 Sep 2004
the phone is not the best looking in the world but what it can do for the price of it just makesit the best phone on the markit